Please note the following care instructions:

• Most stock items are painted with a standard acrylic paint, so if you intend to put them outdoors, the pieces will require a protective coating to assist in preserving the integrity and colours of the paint. For an additional fee, Natureworks can apply a commercial-grade hard-wearing polyurethane clear coating (see FAQs). Make sure you specify a clear coat finish when ordering items that will be used outdoors.
• Most products are designed for display only, so if they are going to be exposed to the public and/or climbed on, they may need to be reinforced and have fixings installed to secure them to a solid footing. This can be quoted as an additional modification at the time of ordering. We can also build items to meet Australian Playground Certification standards, where appropriate.
• The paint finishes will not tolerate submersion underwater and it is imperative that no water is allowed to pool on any painted surface.
• Annually at least, wash with warm, soapy water or sugar soap if required using a soft cloth.
• Do not wash with steel wool or any other materials which may scratch or damage the surface.
• If kept outside, you will need to re-coat the clear protective coating every 12 to 18 months depending on your climate. This can be done with a good quality enamel clear gloss (a spray can is alright). Test it on a small inconspicuous area first. The replica needs to be cleaned before you re-coat with the clear coat. We use Resene Uracryl Clear Semi-Gloss for our protective coating.
• Give your replica a light hand sand using 240 grit sandpaper, then clean off any excess dirt and grit and repaint per the paint manufacturer’s specs. If you desire a high polish or glossy look use a high gloss Uracryl instead.
• Note the colour red and its derivatives are at the greatest risk of fading.
• Colour finish touch up kits are available for small chips or scratches.
• Note that we can do repaints and repairs depending on the scope of work required.